K-BUS Line Coupler（BNLC-00/00.2）
The coupler can be used as line coupler, backbone coupler or repeater as well in existing KNX networks as in new KNX networks. It has a filter table with the help of which bus telegrams are either blocked off from one of the two lines or are passed on to another line thus reducing the bus load. The filter table is created by the ETS (KNX Tool Software) automatically on commissioning the system.
The coupler can be used as line coupler, backbone coupler or repeater as well in existing KNX networks as in new KNX networks. It has a filter table with the help of which bus telegrams are either blocked off from one of the two lines or are passed on to another line thus reducing the bus load. The filter table is created by the ETS (KNX Tool Software) automatically on commissioning the system.
-
Bus Main line21-30V DC, used for power supply of the device
-
Bus Sub line21-30V DC
-
Bus currentMain: <10mA/30V DC, Sub: <5mA/30V DC
-
Bus consumptionMain: <300mW, Sub: <150mW
-
KNX Main/Sub lineLeft bus connection terminal(Red/Black)
-
Operation–5 °C ... + 45 °C
-
Storage–25 °C ... + 55 °C
-
Transport– 25 °C ... + 70 °C
-
Humidity<93%, expect dewing
-
ProtectionIP 20，to EN 60529
-
Dimensions36×90 ×64mm
-
Weight0.1KG
-
HousingPlastic housing, beige
-
DesignModular installation device, on 35mm mounting rail
