KNX Switch Actuator 4/8/12-Fold, 16A, Current Mesurement
16A/channel, un rated voltage 250V AC, 50-60Hz, high-current magnetic relay, max. switching current 20A switching/heating actuator operation mode. Main KNX functions including, current measurement, switching, status response, scene control (5 folds), time switching, preset, logic function, threshold, forced operation etc. Installation: DIN-rail Mounted
|
|
|
Switch Actuator with current detection，4-Fold ARCD-04/16.1 | Switch Actuator with current detection,8-Fold ARCD-08/16.1 | Switch Actuator with current detection,12-Fold ARCD-04/16.2 |
Manual switch operation
Switch and Status response
Bus voltage failure and recovery behavior
Scene and preset control
Logic operation with AND, OR, XOR, gate function
Forced operation and Safety function
Threshold and time function
Control of electro thermal valve drives
Current and Power measurement
Switching counter and Operating hours counter
-
Bus voltage21-30V DC, Via KNX/EIB
-
Bus current<12mA
-
Bus consumption<360mW
-
Un rated voltage250V AC (50/60Hz)
-
In rated current16A
-
Load capacity10A/140uF
-
Max.switching current20A/250V AC
-
Current detection range50mA-16A
-
Min. detection load15W
-
Current detection accuracy±5% and ±20mA
-
Machanical endurance>100x10000
-
Electrical endurance>1x10000
-
ModelARCD-04/16.2、ARCD-08/16.2、ARCD-12/16.2
