KNX Multi-function Actuator Mini 3-Fold, 6A
6A/channel, un rated voltage 250V AC, 50-60Hz, total current of 3 channels less than 12A. Main KNX functions including swicthing, status response, scene control (8 folds), time switching, preset, logic operation, shutter, valve, heating, fan control, 6-fold dry contact in/output, LED indicator. Fits in 86*86mm and German 60mm wall boxes.
The Multifunctional Actuator, 3-Fold, 6A, Flush Mounted (Referred to as Multifunctional actuator) is a module that integrates multiple relay output functions, including switch output, curtain output, fan output or valve output, in addition to dry contact input and LED output indication functions. The corresponding output function can be configured according to actual application requirements.
This module is compact and small in design, Flush mounted, and can be installed in a conventional 80 mm or 86mm wiring box. The output adopts screw terminal to realize electrical connection, and the bus connection is directly connected via KNX terminal. The additional power supply is not required except KNX bus.
This module is compact and small in design, Flush mounted, and can be installed in a conventional 80 mm or 86mm wiring box. The output adopts screw terminal to realize electrical connection, and the bus connection is directly connected via KNX terminal. The additional power supply is not required except KNX bus.
-
ModeAMMAF-03/06.1
-
Dimensionφ53×23.5mm
-
InstallationStandard 80mm or 86mm wall-box
-
Operation voltage21~30V DC, via the KNX bus
-
Current consumption, bus<7mA
-
Charging current, bus<20mA
-
Power consumption, bus<210mW
-
Un Rated Voltage230V AC（50/60Hz），30V DC
-
LED drive voltage5V or 12V optional
-
Rel. humidity<93%, except dewing
-
Weight0.05KG
-
ModelAMMAF-03/06.1
