KNX/IP Router
The IP Router can be used as line or backbone coupler. It provides a data connection between the upper KNXnet/IP line (main line or backbone) and the lower TP KNX bus line (sub line). The basic functionality of the IP Router is to couple the Ethernet with one or more KNX-TP lines. The IP Router features a galvanic isolation between the Ethernet and the KNX-TP line(s). Due to its flexibility the IP Router can be used as a line coupler e.g. to connect several KNX TP lines via Ethernet. And it can be used as a backbone coupler to connect several TP areas or different TP installation systems via Ethernet
Support 4 client connections
Support KNXnet/IP, ARP, ICMP, IGMP, HTTP, UPnP, UDP/IP, TCP/IP, DHCP and Auto IP
Can be used as line or backbone coupler, to couple the Ethernet with one or more KNX-TP lines.
Support filter table routing function
Can be used as the programming interface
-
Bus voltage21-30V DC, Via KNX/EIB
-
Bus current<20mA
-
Bus consumption<600mW
-
ModelBNIPR-00/00.1
